To Next PageTo Next Page
Need help?Do you have a question about the Foscam FI8918W and is the answer not in the manual?
General| Megapixel | - MP |
|---|---|
| Photo feature | No |
| Maximum frame rate | 30 fps |
| Minimum illumination | 0.5 lx |
| Viewing angle, vertical | 120 ° |
| Maximum video resolution | 640 x 480 pixels |
| Viewing angle, horizontal | 300 ° |
| Resolution at capture speed | 640x480@30fps |
| Interface | - |
| Sensor type | CMOS |
| Certification | CE, FCC |
| Product color | Black, White |
| Built-in microphone | Yes |
| Optical sensor size | 1/4 \ |
| Frequency range | 50Hz - 60Hz |
| Internal memory | 256 MB |
| Minimum processor | 2.0GHZ |
| Wireless standard | IEEE 802.11 b/g |
| Security algorithms | WEP, WPA, WPA2 |
| Maximum internal memory | 1024 MB |
| Compatible operating systems | Microsoft Windows 2000, XP, Vista, 7, Mac |
| Storage temperature (T-T) | -10 - 60 °C |
| Storage relative humidity (H-H) | 0 - 90 % |
Weight and Dimensions| Depth | 124 mm |
|---|---|
| Width | 189 mm |
| Height | 200 mm |
| Weight | 418 g |
Lists the main features and capabilities of the FOSCAM FI8918W IP Camera.
Provides crucial initial instructions and warnings for safe and proper camera setup.
Explains the interface for logging into the camera's software, including different modes.
Details the main interface for viewing live video and controlling camera settings.
Guides on viewing and managing multiple cameras from a single interface.
Configures static IP, subnet mask, gateway, and HTTP port.
Explains how to connect the camera to a wireless network using Infra or WPS modes.
Guides on setting up Dynamic DNS for remote access using FOSCAM or third-party services.
Instructions for updating the camera's system and web UI firmware.
