Need help?Do you have a question about the Foscam FI8910E and is the answer not in the manual?
Describes the initial login interface, including language selection and various login mode options for accessing the camera.
Covers the main live view interface, settings like OSD, resolution, and various control functions.
Explains how to use the pan/tilt control buttons for camera movement and IR light operation.
Shows the camera's current operational status, including ID, firmware versions, and network service states.
Manages user accounts, permission levels, and sets the path for alarm recording files.
Enables viewing and managing multiple cameras simultaneously within a single interface.
Provides instructions for adding cameras located on the local area network to the multi-device view.
Guides on adding cameras for remote viewing over the Wide Area Network using DDNS.
Configures essential network parameters like IP address, subnet mask, gateway, and DNS server.
Covers configuring Dynamic DNS services for remote access using domain names, including manufacturer or third-party options.
Manages motion and sound detection settings, sensitivity, and triggers for alarms like email or recording.
Configures Pan/Tilt speed, patrol modes, and preset positions for camera movement and automation.
Provides instructions and precautions for upgrading the camera's system firmware and Web UI.
Guides on installing and using the Foscam IP Camera Viewer app on Android devices for remote monitoring.
Provides instructions for installing and using the Foscam IP Camera Viewer app on iPhones for remote monitoring.
To Next Page
General
