Once you success get Foscam DDNS, you can follow below step to use.
Here take test09.myfoscam.org for example. Go to option of DDNS on the Settings->Network panel, you
can see the domain name.
Here take cp4911.myfoscam.org for example. Go to option of DDNS on the Settings->Network panel, you
can see the domain name.
Now you can use http:// Domain name + HTTP Port to access the camera via internet.
Take hostname cp4911.myfoscam.org and HTTP Port no. 8000 for example, the accessing link of the camera
via internet would be http://cp4911.myfoscam.org:8000
Restore DDNS to factory: If you have configured Third Party DDNS successfully, but you want to use
To Next Page
Loading...
