Need help?Do you have a question about the Foscam FI9805W and is the answer not in the manual?
General| Type | IP security camera |
|---|---|
| PTZ control | No |
| Certification | CE, FCC |
| Placement supported | Outdoor |
| Connectivity technology | Wired & Wireless |
| Form factor | Bullet |
| Product color | Silver |
| Total megapixels | 1.3 MP |
| Maximum resolution | 1280 x 960 pixels |
| Supported video modes | 960p |
| Video formats supported | H.264 |
| Analog signal format system | NTSC, PAL |
| Supported graphics resolutions | 320 x 240, 1280 x 960, 640 x 480 (VGA) |
| Minimum illumination | 0.5 lx |
| Sensor type | CMOS |
| Optical zoom | - x |
| Fixed focal length | 4 mm |
| Security algorithms | 128-bit WEP, WPA, WPA2 |
| Night vision distance | 30 m |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Cabling technology | 10/100Base-T(X) |
| Ethernet LAN (RJ-45) ports | 1 |
| Storage temperature (T-T) | -10 - 60 °C |
| Storage relative humidity (H-H) | 0 - 90 % |
| Minimum RAM | 256 MB |
| Minimum processor | 2.0GHz |
Weight and Dimensions| Weight | 1020 g |
|---|---|
| Package depth | 215 mm |
| Package width | 295 mm |
| Package height | 130 mm |
| Package weight | 1480 g |
Lists the main features and capabilities of the FOSCAM FI9805W camera.
Describes the physical components and interfaces of the camera, including front panel and rear ports.
Guides users on how to connect to and access the network camera within their local area network.
Explains how to access the camera remotely from outside the local network using its WAN IP address.
Instructs on how to stream and view the camera's video feed using the VLC media player.
Details the interface for logging into the surveillance software, including username and password fields.
Describes the main interface for viewing live video feeds and camera status after logging in.
Allows configuration of fundamental camera settings like name, time, mail, user accounts, and multi-device setup.
Covers network configuration, including IP, PPPoE, DDNS, Wi-Fi, UPnP, and port settings.
Configures motion detection alarms, including sensitivity, trigger intervals, and notification methods like email or FTP.
Guides users on installing and setting up the Foscam IP camera viewer app on Android devices.
Explains how to install and configure the Foscam IP camera viewer app on iPhones.
Provides answers to common questions regarding camera setup, connectivity, and troubleshooting.
Details the technical specifications of the FOSCAM FI9805W camera, including sensor, video, and network capabilities.
To Next Page
