Need help?Do you have a question about the Foscam FI9802W and is the answer not in the manual?
General| Total megapixels | 1 MP |
|---|---|
| Maximum resolution | 1280 x 720 pixels |
| Supported video modes | 720p |
| Video formats supported | H.264 |
| White balance | Auto |
| Minimum illumination | 0.5 lx |
| Field of view (FOV) angle | 54 ° |
| Sensor type | CMOS |
| Optical zoom | - x |
| Focal length range | 4 - 4 mm |
| Security algorithms | WEP, WPA, WPA2 |
| Video motion detection | No |
| LED type | IR |
| Type | IP security camera |
| Certification | CE, FCC |
| Placement supported | Indoor & outdoor |
| Connectivity technology | Wired & Wireless |
| Form factor | Bullet |
| Product color | Silver |
| DC-in jack | Yes |
| Ethernet LAN (RJ-45) ports | 1 |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Cabling technology | 10/100Base-T(X) |
| Supported network protocols | HTTP, FTP, TCP / IP, UDP, SMTP, DHCP, PPPoE, DDNS, UPnP |
| Power consumption (typical) | 8 W |
| Sustainability certificates | RoHS |
| Storage temperature (T-T) | -10 - 60 °C |
| Operating temperature (T-T) | -20 - 60 °C |
| Storage relative humidity (H-H) | 0 - 90 % |
| Operating relative humidity (H-H) | 20 - 85 % |
Weight and Dimensions| Depth | 210 mm |
|---|---|
| Width | 100 mm |
| Height | 96 mm |
| Weight | 1023 g |
Lists the main functionalities and capabilities of the camera.
Crucial instructions to follow before setting up and using the camera.
Lists all items included in the product packaging.
Identifies and describes the camera's front-facing parts and LEDs.
Details the camera's I/O ports and the function of the reset button.
Explains how to log into the surveillance software with credentials.
Describes the primary interface for viewing live camera feeds.
Explains UI buttons and the multi-camera monitoring feature.
Configures video modes, resolution, frame rate, and stream types.
Adjusts IR lights, brightness, contrast, and other image parameters.
Guides on adding timestamps and device names to the video feed.
Manages video playback, two-way audio, and audio input/output.
How to take snapshots and start/stop video recordings.
Enables viewing the surveillance feed in full-screen mode.
Controls screen aspect ratio, full screen, and zoom functionality.
Provides system status, information, session, and log data.
Shows active users and their IP addresses accessing the camera.
Records access logs, detailing user, IP, and access times.
Allows setting a custom name for the camera, avoiding special characters.
Configures time zone, NTP sync, and manual time settings.
Sets up email notifications for motion detection events via SMTP.
Manages user accounts and sets privileges for access control.
Guides on adding and viewing multiple cameras simultaneously in one window.
Sets static IP addresses, subnet mask, gateway, and DNS servers.
Configures PPPoE connection with username and password.
Explains Foscam and third-party DDNS setup for remote access.
Guides on configuring port forwarding on routers for remote access.
Details the steps for connecting the camera to a wireless network.
Configures UPnP and HTTP/Media ports for remote access and streaming.
Adjusts stream type, resolution, bit rate, frame rate, and key frame interval.
Adds timestamps and device names to the video display.
Sets image quality and storage path for captured snapshots.
Configures motion detection, sensitivity, trigger interval, and linkage.
Allows defining specific areas and times for motion detection alarms.
Changes the storage path for manually recorded video files.
Configures FTP server settings for uploading recorded images.
Controls access by blocking or allowing specific IP addresses.
Saves and restores camera configuration settings to a file.
Updates the camera's firmware to the latest version.
Resets camera to defaults and reboots the system.
Addresses common questions and issues users might encounter.
Guides on installing necessary browser plugins for camera access.
Instructions to reset the administrator password to factory default.
Solves issues like subnet mismatch, no video, and internet access problems.
Addresses problems with the camera failing to connect to a wireless network.
Lists default network settings and administrator login credentials.
Details the hardware and software specifications of the camera.
Information on how to get help and contact FOSCAM support.
To Next Page
