4.8 PTZ (only FI9805E)
This page will allow you to change the pan / tilt speed and do RS485 settings (Only FI9805E have this feature).
4.8.1 Pan / Tilt Speed
There are five Pt speed types: very fast, fast, normal, slow and very slowly. Select the desired pan / tilt speed
type and click save button .
4.8.2 RS485 Configuration
This camera supports the standard 485 cradle head protocol (PELCO-D and PELCO-P). Please configure the
RS485 protocol corresponding information first, or else the cradle head may cannot work.
4.9 Firewall
This section explains how to control the access permission by checking the client PC's IP addresses. It is
composed of the following columns: Block access from these IP addresses and Only allow access from
these IP addresses.
To Next Page
Loading...
