To Next PageTo Next PageWhy is the Foster BCT Controller vapouriser tray overflowing?
The vapouriser tray typically overflows when the cabinet operates for extended periods without entering ‘Hold’ or ‘Defrost’ mode. If the cabinet doesn't perform these functions after each chill cycle, the accumulated water won't disperse, leading to an overflow.
Describes the controller's initialisation screen display.
Displays after initialisation, showing date, time, and temperature.
Explains the various icons used on the controller's touchpad interface.
Navigates to the homepage from any screen.
Returns to the previous screen.
Accesses the settings menu for modifications.
Provides a summary of the unit's current status.
Allows modification of the unit's time and date settings.
Option to select the display language for the controller.
Initiates a manual defrost cycle and shows progress.
Addresses potential overflow issues with the vapouriser tray.
Explains how to interpret and respond to unit alarms.
Describes the controller's initialisation screen display.
Displays after initialisation, showing date, time, and temperature.
Explains the various icons used on the controller's touchpad interface.
Navigates to the homepage from any screen.
Returns to the previous screen.
Accesses the settings menu for modifications.
Provides a summary of the unit's current status.
Allows modification of the unit's time and date settings.
Option to select the display language for the controller.
Initiates a manual defrost cycle and shows progress.
Addresses potential overflow issues with the vapouriser tray.
Explains how to interpret and respond to unit alarms.
General| Brand | Foster |
|---|---|
| Model | BCT Series |
| Category | Controller |
| Language | English |
