To Next PageTo Next PageWhy is the Foster Controller vapouriser tray overflowing?
The vapouriser tray typically overflows when the cabinet operates for extended periods without entering ‘Hold’ or ‘Defrost’ mode. If the cabinet doesn't perform these functions after each chill cycle, the accumulated water won't disperse, leading to an overflow.
General| Manufacturer | Foster |
|---|---|
| Model | BCT52-26 |
| Category | Controller |
| Input Voltage | 24 VDC |
| Output Current | 5A |
| Protection | Short Circuit |
Key considerations and best practices for effective blast chilling of various food types.
Guidance on addressing issues like vaporiser tray overflowing and alarm displays.
Detailed technical data for 50Hz models, including energy consumption and refrigerant charge.
Technical data related to the freezing cycle performance for various models.
Technical data related to the chilling cycle performance for various models.
Declaration of Conformity statement for the specified equipment and relevant directives.
List of European directives and standards the equipment complies with.
