3
GB
Display Icons and Switches
(Some icons or switches are only visible during adjustment, when activated by parameters or through operation/
manual selection).
User Adjustment Mode
You are required to enter this mode to make any setup changes.
These include Set Point, Keypad Security and display of T1, 2 or 3 probe temperatures.
Press and immediately release after which the and switches will ash/pulse together.
Press to scroll through the following screens:
(Cabinet Version)
Keypad Lock Warning/ Alarm
Service Mode Temperature Setting
Compressor Function Defrost Function
Evaporator Fan Function Reduced Energy Mode
Data Download Switch Light Switch
Decrease Switch Increase Switch
Power Switch
(Counter Version)
To Next Page
Loading...
