How to fix high temperature in my Foster Freezer?
If the internal temperature of your Foster Freezer is too high, make sure the door is closed properly. Also, ensure that the airflow inside isn't blocked due to excessive or poor loading of products. If the temperature returns to normal, the alarm will reset.
Why is my Foster Freezer not cooling properly?
If your Foster Freezer isn't cooling or reaching the correct temperature, first, ensure the temperature is displayed and that the appliance isn't in standby mode ('oFF' on the display). Next, inspect and clean the condenser. Check if a heat source is affecting performance and, if so, move the appliance. Also, verify the product loading is correct.
What to do if my Foster Freezer is not working?
If your Foster Freezer isn't functioning, first, check if it's properly plugged in and that the socket is working by testing it with another appliance. If the socket is fine, check the fuse and replace it if necessary.
What happens after power outage with Foster Freezer?
After a power outage and restoration, carefully check the products stored inside your Foster Freezer to ensure they are still safe to use. The appliance will resume normal operation. You can cancel the 'PF' message by pressing button 3 once.
Why is the condenser temperature too high in my Foster Freezer?
If the condenser temperature in your Foster Freezer is higher than it should be, it might be due to high ambient temperatures. Try to reduce the ambient temperature around the appliance. If the ambient temperature is not high, please contact your authorised dealer or Foster Service.
How to stop the open door alarm on my Foster Freezer?
To stop the open door alarm on your Foster Freezer, simply close the door.
What to do when the condenser clean period has expired on my Foster Freezer?
Please contact your authorised dealer or Foster Service.
What to do if the internal temperature probe fails on my Foster Freezer?
Call your authorised dealer or Foster Service to arrange for this to be replaced.
Comprehensive list of parameters available in the service level menu.
Explains common indicators of appliance operation or faults.
Guides for testing relays and restoring controller to factory settings.
Electrical schematics for EP700H, EP700G, EP700F, EP700M, EP700L, EP700HH, EP700HL, EP700LL models.
Electrical schematics for the EP820HU integral condensing unit.
Electrical schematics for EP1440H, EP1440G, EP1440M, EP1440L models.
General| Brand | Foster |
|---|---|
| Model | EP700H |
| Category | Refrigerator |
| Language | English |
To Next Page
