Before calling your supplier or enginner please make sure that:
a. The plug is located in the socket and the mains power supply is on i.e. is the controller illuminated?.
b. Check to see if the unit is in standby.
c. The fuse for the cabinet has not failed.
d. The cabinet is posioned correctly – as detailed in the rear of this manual
e. The condenser is not blocked or dirty
f. Defrost is not in progress or required
If the reason for the malfuncon cannot be idened, disconnect the electrical supply to the unit and
contact your supplier. When requesng a service call, please quote the model and serial number which can
be found on the white label located on the back of the unit (Serial Number starts CMA......).
English
9
To Next Page
Loading...
