Fostex 8360 - Personal Computer Setting; TCP;IP Setting; Setting for Connection

To Next Page

To Previous Page

After completing the "TCP/IP Setup?" setting for the

recorder, set the TCP/IP and connection settings

for the personal computer.

Personal computer setting

• IP address: [192. 168. 0. ***]

*** is any of numbers between 1 and 254.

<Note>

You cannot set the same IP address for both the recorder

and the personal computer.

• Subnet mask value: [255. 255. 255. 0]

• Default gateway: You do not have to set this.

Set the IP address and subnet mask of the personal com-

puter using the TCP/IP setting window of the personal

computer.

TCP/IP setting

[for WS-FTP]

• Profile Name: Enter a desired name.

• HostName/Address: [192. 168. 0. ***]

*** must be the same number as set for the recorder.

• HostType: Automatic detect

• Anonymous: Enable

• UserID, Password: You do not have to set them.

[for Fetch]

Follow the procedure below.

• From the "Custom" menu bar, select "new shortcut".

• Enter a desired name to the "Name" field.

• Set "Type" to "Folder".

• Enter the IP address for the recorder (192. 168. 0. ***) to the

"Server name" field.

• You do not have to enter the "User name" and "Password"

fields.

• Enter "/" (slash) to the "Directory" field.

Activate the FTP application and make setting for con-

nection as described below according to the application.

Setting for connection