Addendum for D-160 Version 2.0
The software of this product has been upgraded to version 2.0 and the following functions
have been added. This addendum describes only the added functions. For information
regarding basic operation of the D-160, refer to the main Owner’s Manual.
<Additional Functions>
1. Using a SCSI drive as the current drive, in addition to E-IDE disks. (See page
4.)
In addition to an E-IDE hard disk, you may use an external SCSI device as the current
drive. Up to two SCSI drives (current and backup) can be connected to the SCSI
terminal on the D-160.
2. Formatting has been changed. (See page 5.)
The format function for the current drive disk (E-IDE or SCSI) and the backup drive
disk (SCSI) has been changed.
3. A Preview function has been added, and the RECALL key function has been
expanded. (See page 11.)
Pressing a Memory key while holding down the RECALL key enables you to preview
fade-in or fade-out at a point stored in the corresponding Memory key.
4. The Envelope function has been added, and the STOP button function has
been expanded. (See page 13.)
Pressing a RECORD RACK select key while holding down the STOP button enables you
to perform digital scrubbing. you can simultaneously check the signal envelope of
the corresponding track displayed on the screen.
5. Storing function for the Locate points (edit points) has been updated. (See
page 14.)
Now up to 99 (01-99) Locate points can be stored.
6. The Save/Load function for song data has been enhanced. (See page 18.)
You can use a SCSI device as the current drive. This means that you can save and load
using a SCSI device, as well as an E-IDE hard disk. You can also use a DOS-formatted
backup disk to save and load .wav files (RIFF WAVE file format).
<Note>
Due to version update, the procedure described in the “Saving and Loading Song Data” section of the original
manual does not apply any more. Please refer to the procedure on page 18 of this addendum for information on
saving and loading song data.
8288 663 000
To Next Page
Need help?
Recorder Section
