Need help?Do you have a question about the Fostex HP-A3 and is the answer not in the manual?
General| Category | Media Converter |
|---|---|
| Digital Input | Coaxial, Optical |
| Analog Output | RCA |
| Frequency Response | 20 Hz - 20 kHz |
| Power Supply | AC Adapter (DC 12V) |
| Headphone Output Impedance | 10 Ω |
| Input | USB, Optical |
| Headphone Output | 6.3mm (1/4") |
| Output | RCA |
| Supported Sampling Rates | 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz |
| Bit Depth | 16-bit, 24-bit |
| Dimensions | 150 x 44 x 150 mm |
Thanks user for purchasing the HP-A3 and advises reading the manual thoroughly.
Describes the HP-A3 as a high-performance 32-bit DA converter with a headphone amplifier.
Details the POWER/LOCK indicators, PHONES jack, and input/output selection and volume controls.
Identifies the ANALOG OUTPUT, DIGITAL OUTPUT, DIGITAL INPUT, and USB connectors on the rear.
Specifies USB 2 port and OS requirements, and guides on connecting via USB cable.
Explains how to set the HP-A3 as the default audio output device on Mac OS and Windows.
Provides detailed steps for Mac OS, Windows Vista, and Windows XP audio settings.
Recommends setting computer volume to maximum for optimal sound quality.
Guides on using INPUT SEL and OUTPUT SEL switches for desired audio routing.
Explains volume adjustment and shows a diagram of typical connections.
Details USB, Digital I/O, Phones, Analog Out, power, dimensions, and weight.
States compliance with EMC/Low Voltage Directives and potential interference effects.
Provides contact details for Fostex distributors across various European countries.
To Next Page