Fostex X-28H - Recording.25

USING THE REHEARSAL FUNCTION (High Speed
The rehearsal function is also an important part of
footswitch-controlled punch-in recording. When the
rehearsal function is engaged (its indicator in the
display will be lit), pressing the footswitch does not turn
the recording function on and off. Instead, it allows you
to practice the punch-in recording (without erasing the
original track), and to hear the new part replacing the
Mode Only):
original in the monitor, just as if you were actually
recording.
When the REHEARSAL switch is turned on, the X-28H
mimics the punch-in recording process by switching
the monitor between original track and the part to be
punched-in with each press of the footswitch.
Rehearsal
Take
When
rehearsal
function
is on.
PUNCH
IN
PUNCH
OUT
Previous take New part is heard,
is heard.
Previous take
is heard.
The TRANSPORT and REG TRACK indicators in the
display change as shown in the following diagram
during the rehearsal and punch-in/out processes.
Rehearsal
Take
PUNCH PUNCH
IN OUT
- Record track indicator
Q - Input monitor/record indicator
23