Need help?Do you have a question about the Fostex XR-7 and is the answer not in the manual?
General| Brand | Fostex |
|---|---|
| Model | XR-7 |
| Category | Recording Equipment |
| Language | English |
Important safety precautions and operating instructions to read before using the XR-7.
Explains direct recording, allowing simultaneous or sequential recording of multiple sound sources.
Explains the function of PAN knobs in routing signals to the stereo bus and tracks.
Describes the AUX system for effect processing and signal routing.
Explains the foldback (FB) function for monitoring playback signals without recording them.
Explains input monitoring and tape monitoring, defining their respective meanings and usage.
Adjusts the signal level for inputs 1 through 6.
Selects the signal source (input or tape) for each channel's fader.
Assigns sound sources to tracks or positions them in the stereo image.
Selects the signal source to be monitored through headphones or speakers.
Controls the final output level to the stereo out jacks and recording level during mixdown.
Guides on connecting headphones/monitors and adjusting monitoring levels and sources.
Explains how to record four different sound sources simultaneously onto four tracks.
Explains recording six sources onto two tracks via the stereo bus using REC SELECT differently.
Explains how to overdub track 3 while monitoring tracks 1 and 2.
Explains how to overdub track 4 while monitoring tracks 1, 2, and 3.
Provides instructions for initializing the XR-7's controls before starting operations.
Initiates the overdub recording process for track 4.
Adjusts playback signal levels and balance using faders.
Initiates the mixdown process to the master recorder.
Explains how to re-record specific parts of a track using punch-in/out.
Explains ping-pong recording for combining tracks and freeing up recording space.
Initiates the ping-pong recording process.
Details the process of punching in to re-record a section.
Details the process of punching out to stop re-recording a section.
Records the FSK signal onto track 4 for synchronization.
Overdubs sound sources onto tracks 2 and 3 while monitoring.
Adjusts input signal levels for MIDI sound sources.
Executes the mixdown of tape sync playback to the master recorder.
Addresses problems related to sound quality, volume, and distortion.
Covers issues encountered during the recording process.
To Next Page
