Fostex XR-7 User Manual

STEP 8:
Tape Sync Recording (MIDI/TAPE Multi-mix function)
What is tape sync recording?
Tape sync is a technique by which a performance recorded on tape can be synchronized
to the automatic playback of a sequencer or drum machine (or other MIDI device). This
provides the following advantages:
• Since there is no need to record the sound of the MIDI device's playback on tape, you
can conserve tracks.
• Since the MIDI instrument (synthesizer, drum machine, etc.) is recorded directly to
the master tape, the sound retains its original dynamic range and high quality.
• Additional advanced editing techniques are made possible, such as overdubbing the
automatic playback, or re-arranging drum machine rhythm patterns.
When you use tape sync, one of the tape tracks is used to record and playback a
synchronization signal known as an F5K signal. The track containing the FSK signal
performs a role similar to an orchestra conductor. When the FSK signal is played back
and sent to the sequencer or drum machine, the sequencer or drum machine will play
back in synchronization with the tempo map recorded in the signal, and will cause the
other connected MID) devices to play back as well
---- - ^ _
Note: —----
Some MIDI devices are not able to input or output FSK signals. If this is the case with your MIDI
device, you will need a separate MIDl/FSK converter. For details, consult the manual for your MIDI
device.
STEP 8-1:
Before you begin tape sync (Recording the sync signal)
☆ Before beginning tape sync, you need to record the sync signal on track 4.
* Before you begin, initialize the controls of the XR-7.
Headphone

Fostex XR-7 Specifications

General

Brand	Fostex
Model	XR-7
Category	Recording Equipment
Language	English