Foundations trio - Seat and Wheel Adjustments; Brake System Operation

Seat Back Recline:
NOTE: All seat backs must be in the upright position when folding stroller.
To lower seat backs:
1. Pull seat back Recline Handle up (Fig. 1).
2. Lower seat back to recline position and release
seat back recline handle.
To raise seat backs:
1. Pull seat back recline handle up.
2. Push seat back up and forward to upright
position and release seat back recline handle.
3. Check that seat back is locked.
Front Wheel Swivel Lock Operation:
To lock front wheel swivel:
1. Rotate front wheel assembly until it is
straight back and swivel lock is aligned
with swivel lock track (Fig. 1).
2. Push swivel lock up over swivel lock track
until it snaps into place.
3. Check that front swivel is securely locked
by pushing side to side on front wheel
assembly.
4. Repeat steps 1 through 3 for the other
front wheel assembly.
To unlock front wheel swivel:
1. Push swivel lock down until it is free of the
swivel lock track (Fig. 2).
2. Repeat step 1 for the other front wheel
assembly.
Fig. 1
Fig. 2
Swivel
Lock
Track
Swivel
Lock
Stroller Operation & Use (continued)
Recline
Handle
Fig. 1
9
Stroller Operation & Use (continued)
Parking Brake Operation:
To lock parking brake:
1. Press down on parking brake lock bar
on the rear wheel assembly (Fig. 1).
2. Check that wheels are locked.
To unlock parking brake:
1. Lift parking brake lock bar up (Fig. 2).
Runaway Brake Operation:
To release runaway brake:
1. Pull runaway brake bar back and hold
runaway brake bar against stroller handle
while pushing stroller (Fig. 3).
To apply runaway brake:
1. Release runaway brake bar (Fig. 4).
Fig. 1
Fig. 2
Fig. 3
Fig. 4
10