Need help?Do you have a question about the Four Winds UltraXStream and is the answer not in the manual?
General| Brand | Four Winds |
|---|---|
| Model | UltraXStream |
| Category | Hot Tub |
| Language | English |
Diving may result in serious injury or death.
Exercise extreme caution to prevent unsupervised children.
Never operate the spa if suction fittings are broken or missing.
Install spa at least 5 feet from any metal surface.
Excessive water temperatures, alcohol, or medications can pose risks.
Prolonged immersion in hot water may induce hyperthermia.
Your swim spa must be fully supported over the entire base.
Ensure 24" (61 cm) clearance around the exterior cabinet for servicing.
Details USA and EURO pack requirements, wiring, and GFCI.
Recommends filter run times, cleaning, and surface care.
Essential for maintaining spa water quality and chemical levels.
Guidance on replacing filters and maintaining spa covers.
Details air controls, diverter, and water feature valves.
Explains jet adjustments, spa lighting, and control panels.
Information on controlling the optional stereo system.
Measures spa water acidity/basicity; target 7.2-7.8 pH.
Measures water's resistance to pH change; target 80-120 ppm.
Measures dissolved minerals; target 100-400 ppm.
Defines Bromine (3.0-5.0 ppm) and Chlorine (1.5-3.0 ppm) for sanitization.
Explains how test strips work and filter cleaning needs.
Describes the ozone generator for water oxidation and sanitization.
Recommends 100*F for use, 80*F when not in use.
Explains Standard, Economy, Sleep, Ready, and Rest modes.
Allows setting high (80-104*F) and low (50-99*F) temperature ranges.
How to control the spa remotely via a smartphone app.
Covers shell structure (10 yrs) and surface finish (7 yrs).
Covers plumbing (5 yrs) and electrical components (3 yrs).
Covers accessory systems (1 yr) and mechanical parts (1 yr).
Lists non-covered damages and how to submit claims.
Details 60 Amp, 50 Amp, and 30 Amp breaker requirements for USA.
Explains concerns and correct wiring for GFCI breakers.
Details 32 AMP GFCI breaker requirements for 1-3 and 4 pump systems.
Covers initial start-up, priming mode, and basic screen navigation.
Explains how to set temperature, control jets, lights, and scenes.
Details heat modes, dual temperature ranges, and time settings.
Explains how to lock controls, set filtration cycles, and unlock.
Lists common error codes (MOXX) related to temperature, flow, and pump issues.
Explains how to manage reminders for pH, sanitizer, filter, and GFCI testing.
To Next Page
