FOUR MP100BTi User Manual

2
1
OPERATION
AUXILIARY INPUT
The unit can be connected to a portable
audio player through the AUX IN jack (10).
And press MODE button (3) to select AUX
IN mode when inserted an audio source to
the unit.
RADIO OPERATION
 SWITCHING TO RADIO MODE
Press MODE button (3) to select radio
mode, the radio mode appears in the
display together with the memory band
and frequency.
 SELECTING THE RADIO BAND
At radio mode, press BAND button (4)
shortly to select the desired band.
The reception band will change in the
following order:
→FM1→ FM2→ FM3
 SELECTING STATION
Press button (17) or button (6)
shortly to activate automatic seek
function. It will search up/down a
station automatically. Press for 2
seconds until “MANUAL” appears on
the display, the manual tuning mode is
selected. In this mode you can turn
up/down a step
frequency one by one till searched a
station. If both buttons have not been
pressed for 5 seconds, it will return to
seek tuning mode and “AUTO”
appears on the display.
- AUTOMATIC MEMORY STORING &
PROGRAM SCANNING
- Automatic memory storing
Press AS/PS button (2) for 2
seconds, the radio searches from the
87.5MHz
frequency and checks the signal
strength until one cycle search is
finished. And then some strong
stations are stored into the
corresponding preset number button.
- Program scanning
Press AS/PS button (2) shortly to
scan preset station. The radio is
holding at that preset number for
several seconds with release mute,
then searches again.
 MANUALLY STORE STATION &
RECALL PRESET STATION
To received a station, Press one of the
preset button (12~17) for 2 seconds.
The current station is stored into the
number button. Shortly press the preset
button (12~17) to directly listen the
station that saved in the corresponding
preset button.
RDS (RADIO DATA SYSTEM)
OPERATION
 Setting RDS mode
Press and hold SEL button into the
RDS menu. It will show AF on the
display. Rotating audio knob (6) to
switch to on or off.
Whenever AF is on, symbol “AF”
appears on the display.
Program name is displayed on
receiving a RDS station.
“AF” starts blinking if the broadcasting
signal getting worse.
 Listening to Traffic Announcement
In TA item of the RDS menu. Rotating
the audio knob (6) to turn on/off the TA
function. When TA mode is on and a
traffic announcement is transmitted:
When the unit was in MP3 or AUX IN
mode, it will switch temporarily to radio
mode.
When TA mode is on, TA of individual
segment is turned on. When a TP
station is received, TP of individual
21

FOUR MP100BTi Specifications

General

Brand	FOUR
Model	MP100BTi
Category	Stereo System
Language	English