The noise emitted, measured in conformity with the standards EN 3744 and EN 11201 is:
- Sound pressure level LpA = 64,9 dB(A)
- Sound power level LWA = 77,9 dB(A)
- Uncertainty of measurement K = 3 dB.
Noise levels are emission levels and do not necessarily indicate safe working conditions. Even if
there is a connection between emission levels and exposure levels, the first ones cannot be
used to determine safely if other precautions are necessary. The factors that can influence the
actual exposure level of the operator include exposure length, environment features and other
sources of noise, as for example the number of machines and operations present. Besides,
exposure levels can change from country to country. However, these instructions enable the
user of the machine to better evaluate the dangers and risks.
Drill press noise emission is very low and thus not dangerous for the user, however, if other
tools are working or in case of noisy environment ear protection devices could be necessary.
DRILL PRESS F11-951 AND F11-991
Your drill press is delivered complete inside the package. Remove the package carefully and
check that nothing is missing or damaged.
In case there are any faulty or damaged parts, do not use them in order not to compromise tool
efficiency and safety. Address to an after sales centre to replace faulty parts.
To make the drill press work perfectly you have to assemble the various parts, for which there is
a detailed explanation later on.
We recommend you to read carefully the assembly instructions and to follow them to the letter.
F11-951 DRILL PRESS
Fig. 1 illustrates the drill press F11-951 completely assembled and Fig. 2 all the parts included
in the package.
F11-991 DRILL PRESS
F11-991 drill press is provided with a workbench assembled on a rack and with spindle
assembled on a independent morse cone.
Fig. 1 illustrates the assembled drill press, Fig. 2 the basic parts and Fig. 22 the remaining
parts:
10 Height adjusting handle
11 Morse cone MK2 to fix the spindle
12 Spindle for morse cone MK
13 Morse cone extraction wrench
14 15 Supporting rings for the rack
16 Workbench’s height adjusting rack
To Next Page
Loading...
Need help?
General
