35
Before using any kind of extension lead, check ther are not bare wires and that the insulation
is not cut or worn. Repair and change immediately it if it is damaged or worn.
WARNING:
Extension lead must be arranged away from the working area in order that they do not get in
touch with the workpieces, the tool or other parts of the machine, thus creating possible risks.
WARNING:
KEEP THE TOOLS AND THE EQUIPMENT AT A SAFE DISTANCE FROM CHILDREN
This machine has been manufactured for longitudinal and cross cutting.
The blade can be tilted from 0 to 45° and at 0° it can cut up to 80 mm, while if the blade is
angled it can cut up to a width of 55 mm.
The machine is stable enough, however, it is possible to fix it to the ground.
USE LIMITS
DO NOT cut wood wider than 80 mm
DO NOT cut metal, stone, rubber, plastics, chalk, glass wool, etc.
DO NOT cut stubs or irregular wood pieces.
DO NOT use this machine for ribbing or moulding.
DO NOT assemble other tools or different saw blades.
DO NOT use it as a portable tool or a not fixed machine.
DO NOT modify the machine, the safety and protection devices or the switches.
NEVER use the machine without protection or safety devices.
DO NOT use this machine to make blind grooves.
REMOVE THE TRANSPORT PROTECTION DEVICE BEFORE USE
IMPORTANT
Before use, remove the transport protection device:
4) Remove the bottom plate by looseining the frou screws.
5) Remove the transport protection device at the engine level.
6) Fix the bottom plate again wiht the foru screws.
RECOMMENDED USE
To Next Page
Loading...
