36
Engine capacity: 1500 W
Voltage and frequency: 230 V - 50 Hz
Operation: continuous
Saw blade’s diameter: 254 mm
Blade width when assembled: 1,8 mm
Cutting width when the blade is assembled: 2,8 mm
Bore diameter: 30 mm
Rotational speed: 4500 RPM
Riving knife and groove’s width: 2 mm – 6,2 mm
Cutting height at 90°: 80 mm
Cutting height at 45°: 55 mm
Workbench dimensions: 430 x 638 mm
Workbench extensions: 730 x 818 mm
Blade angle: from 0 to 45 °
Net weight: 27,5 Kg
The noise emitted, measured in conformity with the standards EN 3744 and EN 11201 is:
- Sound pressure level LpA = 99,3 dB(A)
- Sound power level LWA = 112,4 dB(A)
- Uncertainty of measurement K = 3 dB
We recommend you to use ear protection devices.
The sources of the noise of the saw are: the electric engine and its ventilation system, the blade
and the material to be cut.
We advise you to control the engine, its ventilation system and the aspiration passages. As far
as the saw blade is concerned, it is preferable to use silenced type of blades and to keep them
in good conditions. We recommend to use the correct saw blade and to keep firmly the
workpiece to be cut. As far as the gears are concerned, you have only to check periodically their
consumption by verifying the play with the saw blade.
Noise levels are emission levels and do not necessarily indicate safe working conditions. Even if
there is a connection between emission levels and exposure levels, the first ones cannot be
used to determine safely if other precautions are necessary. The factors that can influence the
actual exposure level of the operator include the exposure length, environment features and
other sources of noise, as for example the number of machines and operations present.
Besides, exposure levels can change from country to country. However, these instructions
enable the user of the machine to better evaluate the dangers and risks.
TECHNICAL SPECIFICATIONS
NOISE CONDITIONS
To Next Page
Loading...
