37
In the package there are:
1. Table saw
2. Goniometer
3. Rip fence
4. Pusher
5. Two workbench extensions
6. Four attach bars for workbench extensions
7. Two fixing rails for the rip fence
8. Screws for fixing wokbench extensions and rails
9. Base
• Four feet
• Four bottom crossbars
• Four upper crossbars
• 24 bolts and nuts
In some models some parts such as workbench extensions and the base are provided as
extras.
Remove the table saw and all the parts from the package, check if there are any missing or
damaged parts.
If you find any faulty or damaged parts do not use them in order not to endanger the efficiency
and the safety of the machine. To change faulty parts consult an after sales centre.
To make the table saw work perfectly you must assemble the various parts, for which you can
find a detailed explanation below.
We recommend you to read carefully the assembly instructions and to follow them to the letter.
REMOVAL OF PACKAGE
To Next Page
Loading...
