SPECIFICATIONS
Motor : 550W – 110V (0.75hp)
No load speed : 650-1600rpm
Full load speed : 280-950rpm
Sanding disc diameter : 225mm
Dimensions (h x l x d) : 1530x250x370mm
Weight : 4.7kg
NOISE INFORMATION
The noise level of the machine is measured according to the standard DIN IN ISO 3744; 11/95, E DIN IN 31201;
6/93, Annex A ISO 7960; 2/95 because the levels of sound pressure exceed 85 dbA during use. Protective measures
against the noise are necessary.
The quoted emission values are calculated according to standards and not related to use in the workplace. Although
there is a correlation between these various levels of emission, it is impossible to draw any conclusion on additional
necessary precautions. Factors having a potential influence on the level of sound transmission in the workplace
include the working time, the size of the room as well as the other sources of noise (e.g. the number of machines
being used, other noisy operations at the same time). The thresholds of sound level vary between countries. For
these reasons, we recommend users wear ear defenders when using this machine.
Sound pressure level LpA = 91dB(A)
Sound power level LWA = 102dB(A)
VIBRATION INFORMATION
Hand/arm vibration 3.2m/s
2
To Next Page
Loading...
General