EasyManuals Logo

Fox MARS User Manual

Default Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
GB
INSTRUCTION MANUAL
9. Digital time display.
This displays the operation time in minutes; the longest possible time that can be set is
60 minutes.
10. Time prolongation key 1
A single press of this key will prolong the time on the digital display by 10 minutes. Each
subsequent pressing of the key will prolong the operation time by the 10 minutes.
11. Time prolongation key 2
An single press of this key will prolong the time on the digital display by another 1 minute.
Each subsequent press of this key will prolong the operation time by another 1 minute.
12. Temperature display
This indicates the chosen temperature level. There are 6 temperature levels that can be
selected.
13. Temperature level adjustment key
This key is used to adjust the temperature. A single press will lower the temperature by
one level.
14. Temperature level adjustment key
This key is used to adjust the temperature. A single press will increase the temperature
by one level.
15. START key
The pressing of this key starts the equipment in the chosen mode.
16. OZONE key
The pressing of this key starts the Ozone function and the indicating lamp will light up. If
you press this key once again, the Ozone function will be stopped and the indicating lamp
will go out. The ozone therapy used in the sauna has an outstanding bactericidal and
fungicidal action as well as oxidative properties. As the result of ozone action, the skin on
the scalp and hair is cleaned after the chemical treatments and the blood supply to the
skin on the scalp and hair growth stimulation are improved.
17. CLEAR key
If you want to change the setting mode, either before or after operation, this will be
possible only after this key is pressed. You can also press this key if you need to stop the
operation of the equipment. Once the working mode is finished, you can choose the next
mode only after this key is pressed.
SERVICE MANUAL
1. Before you plug in the equipment, make sure that the actual supply voltage meets the
voltage requirements of the equipment.
2. During equipment operation, the ambient temperature should be between 5
o
C and 40
o
C,
and the relative humidity below 95%.
3. Add the DISTILLED WATER!!! (as shown in figure 3)
a) Open the equipment cover.
b) Pull the handle of the container towards the control panel.
c) Gently pull the container up(be careful to avoid burns).
d) Add the distilled water to the container; the water lever must not exceed the maximum
indicated on the container.
e) Insert the water container into the equipment along the guide rail; the container holder
should be in the vertical position; make sure that the seals are in position.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fox MARS and is the answer not in the manual?

Fox MARS Specifications

General IconGeneral
BrandFox
ModelMARS
CategoryPersonal Care Products
LanguageEnglish