GB
STALKER 2 MAN DOME X
GB
STALKER 2 MAN DOME X
Knot material ties over
poles as (fig.5).
Connect clip to front
porch as shown in
(fig.6) and adjust to
suit. Fit top canopy
cover over dome and
secure by attaching
the elastics to the
hooks provided.
(Fox logo should be
facing the front).
Fig 7 shows pegging
points and guy rope
points peg out the
front and rear points
first as indicated posi-
tions 1 & 2 then peg
out intermediate
points position 3 finally
adjust porch to suit.
Fig.7
Fig.5
Fig.6
1
2
3
3
Lay the inner tent out inside the outer skin. The inner tent for the first time of using will need to be
clipped in using the adjustable clips at the base and the elasticated toggles on the sides. To hang
the inner tentto the outer see (fig. 4). Once this is completed the inner tent stays connected to the
outer to aid the quick erection of your dome when next used.
Fig.4
To Next Page
Loading...
