To Next PageTo Next Page
Need help?Do you have a question about the Foxboro SRD991 and is the answer not in the manual?
General| Input Signal | 4 to 20 mA |
|---|---|
| Output Signal | Pneumatic |
| Power Supply | 24 VDC |
| Communication Protocol | HART |
| Operating Temperature | -40 to 85 °C (-40 to 185 °F) |
| Temperature Range | -40 to 85 °C (-40 to 185 °F) |
| Protection Class | IP66/NEMA 4X |
| Enclosure Rating | IP66/NEMA 4X |
| Ambient Temperature Range | -40 to 85 °C (-40 to 185 °F) |
| Supply Pressure | 1.4 to 7 bar (20 to 100 psi) |
| Housing Material | Aluminum or Stainless Steel |
| Air Consumption | 0.02 Nm³/h at 1.4 bar supply pressure |
| Linearity | <0.5% |
| Repeatability | <0.3% |
| Materials | Aluminum, Stainless steel |
| Type | Intelligent Electropneumatic Positioner |
| Mounting | According to NAMUR recommendation |
Mounting the positioner to linear actuators, including NAMUR and direct mounting.
Mounting the positioner to rotary actuators with details on feedback spindle and clearance.
Configuration of input signal (4-20mA) and supply voltage for various communication types.
Connection details for inductive proximity sensors (NAMUR/DIN 19234).
Details for binary outputs, binary inputs, and position feedback/alarm options.
