Chapter 3 BIOS Description
43
vPower Management Events
Press <Enter> to set the items of power management events.
vReload Global Timer Events
Primary/Secondary IDE 0/1
When these items are enabled, the system will restart the power saving timeout
counters when any activity is detected on any of the drivers or devices on
the primary or secondary 0/1 IDE channel.
vFDD,COM,LPT Port
When this item is enable,the system will restart the power saving time-out
counters when any activity is detected on the floppy disk drive,serial ports,or
the parallel port.
vPCI PIRQ[A-D]#
When this item is disabled,any PCI device set as the Master will not power on
the system.
PDF 文件使用 "pdfFactory" 试用版本创建 Æ Æ www.fineprint.com.cn
To Next Page
Loading...
