Foxconn 945P7MD - PC Health Status

Chapter 3 BIOS Description
46
PC Health Status
vShutdown Temperature
This option is used to set the system temperature upper limit. When the
temperature exceeds the setting value, the motherboard will automatically cut
off power to the computer.
vWarning Temperature
This option is used to set the system temperature upper limit. When the tem
perature exceeds the setting value, the motherboard will automatically cut off
power to the computer.
vCPU VCore/VDDR/ +3.3V/ +12V/ +5.0V
The current voltages will be automatically detected by the system.
vCPU/System Temperature
The CPU/System temperature will be automatically detected by the system.
vCPU/System Fan Speed
The CPU/System fan speed will be automatically detected by the system.
vSmart Fan Control
This option is used to enable or disable smart fan function. “PWM Mode” can
enable smart fan function.
vPWM Start Temp (
0
C )
This option is used to set beginning temperature. when temperature gets to
this value, Smart Fan starts to take effect.
PC Health Status Menu
vCase Open Warning
This option is used to enable or disable case open warning function.
PDF 文件使用 "pdfFactory" 试用版本创建 Æ Æ www.fineprint.com.cn