3
40
BIOS Security Features
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
BIOS Security Features
Security Settings
Help Item
Supervisor Password : Installed Install or change the
User Password : Installed password.
Change Supervisor Password [Press Enter]
User Access Level [Full Access]
Change User Password [Press Enter]
Clear User Password [Press Enter]
Password Check [Setup]
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
[Press Enter]
► Change Supervisor Password
This item is used to install or change supervisor password.
After you input Supervisor password, it then will ask you to input
user password optionally.
► User Access Level
This item is used to set user access level.
The available settings are:
[No Access]: Prevent user access to the setup utility.
[View Only]: Allow access to the setup utility but the elds can not be changed.
[Limited]: Allow only limited elds to be changed, such as date and time.
[Full Access]: Allow any eld to be changed except the supervisor password.
► Change User Password
This item is used to install or change user password.
► Clear User Password
This item will be displayed only when a User Password was set before. It is used to clear the
user password.
► Password Check
When it is set to [Setup], a password is required to enter the BIOS setup; select [Always], a
password is required not only to enter BIOS setup, but also on each boot of your PC.
Enter New Password :
To Next Page
Loading...
Need help?
General
