Foxconn H61MD Series - Advanced Configuration Options

Advanced
▶ North Bridge
▶ ME Subsystem
▶ Onboard Device Configuration
▶ SATA Configuration
▶ Super IO Configuration
▶ Network Stack
North Bridge Parameters
→ ←: Select Screen
↑ ↓/Click: Select Item
Enter/Dbl Click: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
Version 2.15.1234. Copyright (C) 2012 American Megatrends, Inc.
Main Advanced Boot Power Health SecurityF-center Save&Exit
►NorthBridge/MESubsystem/OnboardDeviceConguration/SATAConguration
/SuperIOConguration/NetworkStack
Press <Enter> to go to its submenu.
North Bridge
North Bridge Configuration
Memory Information
Total Memory 1024 MB (DDR3 1333)
Memory Slot1 Not Present
Memory Slot2 1024 MB (DDR3 1333)
Memory Configuration
Integrated Graphics [Auto]
UMA Frame buffer Size [256M]
Initate Graphics Adapter [Auto]
VT-d Unsupported
IGD Multi-Montior [Disabled]
DVMT/FIXED Memory [256M]
Keep IGD enabled based
on the setup options.
→ ←: Select Screen
↑ ↓/Click: Select Item
Enter/Dbl Click: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
Version 2.15.1234. Copyright (C) 2012 American Megatrends, Inc.
Main Advanced Boot Power Health SecurityF-center Save&Exit
►TotalMemory
This item displays the current using memory information.
►MemorySlot1/2
BIOS SETUP
28