Foxconn H61MD Series - Security

Security
►AdministratorPassword
This item is used to install or change administrator password.
 Afteryouinputadministratorpassword,itthenwillaskyouto=conrmthepassword.
►UserPassword
This item is used to install or change user password.
Only when there exists a Administrator password, then this setting can be activated.
►HDDBootSectorWrite
This item is used to enable or disable protect HDD MBR from avoiding destroied by virus.
►SecureBootmenu
Press <Enter> to go to its submenu.
Security configuration
Administrator Password Not Installed
User Password Not Installed
Administator Password
HDD BootSector Write [Normal]
▶ Secure Boot menu
Set Administrator
Password.The password
must be 1 to 20
characters long.
→ ←: Select Screen
↑ ↓/Click: Select Item
Enter/Dbl Click: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
Version 2.15.1234. Copyright (C) 2012 American Megatrends, Inc.
Main Advanced Boot Power Health SecurityF-center Save&Exit
BIOS SETUP
39