Foxconn P55A - Page 36

3
29
demote information.
► C3 Auto Demotion
When enable, CPU will conditionally demote C6/C7 requests to C3 based on uncore
auto-demote information.
Voltage Options
► Vcore Offset Control
This item is used to adjust Vcore offset voltage, you can use [+] or [-] to adjust the value.
► PCH Voltage Control
When enable, this option is used to adjust the PCH voltage in a step of 50mV. The voltage can
be incremented from +50mV to +250mV.
► Adjust DRAM Voltage
When enable, this option is used to adjust the DRAM voltage in a step of 50mV. The voltage
can be incremented from +50mV to +750mV.
CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
Voltage Options
► Vcore Offset Control [0] Help Item
► PCH Voltage Control [Disabled]
► Adjust DRAM Voltage [Disabled] Allows BIOS to set
CPU voltage
6.25mV per step.
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
[0]