Foxconn P67A Series - Performance Tuning

3
26
It is used to select the C-State mode.
Performance Tuning
► CPU Performance Tuning/Chipset Performance Tuning
Press <Enter> to go to relative submenu.
CPU Performance Tuning
► Non Turbo Ratio Override
This item is used to set the Non Turbo Ratio Override. You can use [+] or [-] to adjust the
Version 2.02.1205. Copyright (C) 2010 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
▶ CPU Performance Tuning
▶ Chipset Performance Tning
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-:
Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4:
Save & Exit
ESC: Exit
CPU Performance Tuning
Advanced
Version 2.02.1205. Copyright (C) 2010 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Non Turbo Ratio Override 25
Host Clock Override(1/100 MHz) 10000
CPU Voltage (1/10000 Volt) 0
Power Limit 1 Value (Watt) 95
Power Limit 2 Switch [Enabled]
Power Limit 2 Value 118
EIST [Enabled]
Turbo Mode [Enabled]
1-Core Ratio Limit 29
2-Core Ratio Limit 28
3-Core Ratio Limit 27
4-Core Ratio Limit 26
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-:
Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4:
Save & Exit
ESC: Exit
Non Turbo Ratio Override
Advanced
25