Foxconn P67A Series - Super Io Configuration; Serial Port; Device Settings; Change Settings

3
31
Super IO Conguration
► Serial Port
This item is used to enable or disable the serial port (COM).
► Device Settings
This item shows the resource assigned to the serial port.
► Change Settings
This item is used to select an optimal settings for the serial port.
► Device Mode
This item is used to change the serial port mode.
► CIR Controller
This item is used to enabled or disabled the CIR Controller.
Version 2.02.1205. Copyright (C) 2010 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Super IO Configuration
Super IO Chip IT8728
Serial Port 0 Configuration
Serial Port [Enabled]
Device Settings IO=3F8h; IRQ=4;
Change Settings [Auto]
Device Mode [Standard Serial Po...]
CIR Controller Configuration
CIR Controller [Disabled]
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-:
Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4:
Save & Exit
ESC: Exit
Enable or Disable Serial Port
(COM)
Advanced