To Next PageTo Next PageWhat to do if my FoxESS F Series is showing Relay Fail?
If your FoxESS Inverter displays a Relay Fail error, disconnect PV (+) and PV (-) with DC. After the LCD switches off, reconnect and check again. If the problem continues, further assistance may be needed.
What to do if my FoxESS F Series Inverter is showing GFCD Fault?
If your FoxESS Inverter is showing a GFCD Fault, disconnect PV (+) and PV (-) with DC. After the LCD switches off, reconnect and check again. If the problem persists, further assistance may be needed.
Describes the intended function of E/F series PV inverters in converting DC to AC for the grid.
Details critical safety warnings and precautions for handling the inverter.
Identifies and illustrates the various connection terminals on the inverter.
Details the specifications for the DC input of the inverter.
Details the specifications for the AC output of the inverter.
General information on connecting the inverter to PV arrays and the grid.
Details the primary steps for connecting PV strings to the inverter.
Instructions for starting up and operating the inverter after installation.
Provides guidance on identifying and resolving common inverter problems.
General| Max Output Power | 3.3 kVA, 6.6 kVA |
|---|---|
| Max. AC Apparent Power | 3.3 kVA, 6.6 kVA |
| AC Output Frequency | 50/60 Hz |
| Operating Temperature Range | -25 ~ +60 °C |
| Operating Temperature | -25 ~ +60 °C |
