T Series User Manual www.fox-ess.com P a g e | 2
1.4 Symbols Explanation
This section explains the symbols shown on the inverter and on the type label：
Symbol Explanation CE mark. The inverter complies with the requirements of the
applicable CE guidelines.
Beware of hot surface. The inverter can become hot during operation. Avoid
contact during operation.
Danger of high voltages.
Danger to life due to high voltages in the inverter!
Danger.
Risk of electric shock!
Danger to life due to high voltage.
There is residual voltage in the inverter which needs 5 min to discharge.
Wait 5 min before you open the upper lid.
Product should not be disposed as household waste
2. Safety
2.1 Appropriate Usage
The T Series inverter is designed and tested in accordance with international safety requirements. However,
certain safety precautions must be taken into account when installing and operating this inverter. The installer
must read and follow all instructions, cautions and warnings in this installation manual.
▪ All operations including transport, installation, start-up and maintenance, must be carried out by
qualified, trained personnel.
▪ The electrical installation & maintenance of the inverter shall be conducted by a licensed electrician and
To Next Page
Loading...
