T Series User Manual www.fox-ess.com P a g e | 17
6.3 Communication Device Installation (Optional)
The T Series inverter is available with multiple communication options such as WiFi, GPRS, RS485, and Meter with
an external device.
Operating information like output voltage, current, frequency, fault information, etc. can be monitored locally or
remotely via these interfaces.
➢ WiFi/GPRS (Optional)
The inverter has an interface for WiFi/GPRS devices that allow this device to collect information from inverter;
including inverter working status, performance etc., and update that information to monitoring platform (the
WiFi/GPRS device is available to purchase from your local supplier).
Connection steps:
1. For GPRS device: Please insert the SIM Card (please refer to the GPRS product manual for more details).
2. Plug the WiFi/GPRS device into “WiFi/GPRS” port at the bottom of the inverter.
3. For WiFi device: Connect the WiFi with the local router and complete the WiFi configuration (please refer to
the WiFi product manual for more details).
4. Set-up the site account on the FoxESS monitoring platform (please refer to the monitoring user manual for
more details).
➢ RS485/Meter
To Next Page
Loading...
