©
2021 FOXTECH All Rights Reserved
20
Under the Q_STABLIZE Mode
1.Unlock the plane under the Q_STABLIZE mode. (set the throttle at minimum speed and turn the
direction stick to the far right.)
2.Check the throttle stick: when you push the throttle-stick, the motors speed will increase, and pull back the
throttle-stick, the motors speed will decrease.
3. Push the pitch-stick, the speed of the front motor will decrease and the back motor will increase, the two
V-type tails will go down.
7. Turn the direction-stick to the left,the left V-type tail will go up, and the right tail will go down.
8. Turn the direction-stick to the right, the right V-type tail will go up, and the left tail will go down.
FOXTECH AYK-350 User Manual
To Next Page
Loading...
Need help?
General
