Foxtech AYK-350 VTOL - Angle Deviation Compensation Checking

FOXTECH AYK-350 User Manual
©
2021 FOXTECH All Rights Reserved
22
Angle Deviation Compensation Checking
Unlock the plane under the Q_STABLIZE mode:
1. Plane leans forward, the speed of the front motors will increase, the back motor-decrease,the two V-type tails go
up.
2. Plane leans back, the speed of front motors will decrease, the back motor-increase, the two V-type tails go
down.
3. Plane leans to the left, left aileron will go down, and the right aileron will go up, the speed of left motor
increases, and the right motor decreases.
4. Plane leans to the right,left aileron will go down, and the right aileron will go up,the speed of left motor
decreases, and the right motor increases;