Foxwell NT510 - 5.1 System Status

27
AutoMaster Pro Manual_English_V1.01
● Service $04 - clear/reset emission-related diagnostic information
● Service $05 - request oxygen sensor monitoring test results
● Service $06 - request on-board monitoring test results for specific monitored systems
● Service $07 - request emission-related diagnostic trouble codes detected during current or
last completed driving cycle
● Service $08 - request control of on-board system, test or component
● Service $09 - request Vehicle Information
When OBDII/EOBD application is selected from Home screen, the scanner starts to detect the
communicaiton protocol autometically. Once the connection has established, a menu that lists all
of the tests available on the identified vehicle displays. Menu options typically include:
● System Status
● Read Codes
● Freeze Frame Data
● Erase Codes
● Live Data
● I/M Readiness
● O2 Sensor Test
● On-board Monitor Test
● Component Test
● Vehicle Information
● Modules Present
● Code Lookup
NOTE
Not all function options listed above are applicable to all vehicles. Available options may vary by
the year, model, and make of the test vehicle. A “The selected mode is not supported!” message
displays if the option is not applicable to the vehicle under test.
5.1 System Status
System Status option open a screen with a summary of system status of the vehicle under test.
To view summary system status of a vehicle:
1. Scroll with the arrow keys to highlight System Status from Diagnostic Menu and press the
ENTER key.
Figure 5-1 Sample Diagnostic Menu Screen
2. A screen with detailed information displays.