Foxwell NT510 - Configure Beeper

48
AutoMaster Pro Manual_English_V1.01
Figure 7-3 Sample Setup Screen
2. Press the LEFT/RIGHT arrow key select an item and press the ENTER key to save and return.
Figure 7-4 Sample Language Selection Screen
7.3 Configure Beeper
Selecting Beep Set opens a dialog box that allows you to turn on/off the beeper.
To turn on/off the beeper:
1. Scroll with the arrow keys to highlight Beep Set from Setup menu and press the ENTER key.
Figure 7-5 Sample Setup Screen
2. Press the LEFT/RIGHT arrow key select an item and press the ENTER key to save and return.