41
AutoMaster Pro Manual_English_V1.01
● Some manufacturers do not allow tools to control vehicle systems.
●The manufacturer sets the criteria to automatically stop test. Refer to appropriate vehicle service
manual before using this function.
To perform a component test:
1. Scroll with the arrow keys to highlight Component Test from Diagnostic Menu and press the
ENTER key. A screen with a list of available tests displays.
Figure 5-32 Sample Diagnostic Menu Screen
2. Scroll with the arrow keys to highlight a system or component, press the ENTER key to start
test and the scanner displays the message “Command Sent!”.
Figure 5-33 Sample Component test screen
3. Press the BACK key to exit and return.
To Next Page
Loading...
