39
NT7X6 Series User's Manual V1.2
1. Press Clear Codes from Select Diagnostic Function menu.
Figure 8-13 Sample Function Menu Screen
2. Follow the on-screen instructions and answer questions about the vehicle
being tested to complete the procedure.
3. Check the codes again. If any codes remain, repeat the Clear Codes
steps.
8.2.3 Live Data
Live Data menu lets you view real time PID data in text and plot formats,
learn good sensor data and compare them with faulty data, and record live
data from a selected vehicle electronic control module.
There are two ways to select the PID data of control module:
● All Data
●
Custom List
Figure 8-14 Sample Function Menu Screen
8.2.3.1 All Data
All Data menu lets you view all live PID data from a selected control module.
To view all live PID data:
1. Press Select ALL for select all live PID data and press Deselect ALL to
deselect all items.
To Next Page
Loading...
