Automotive Diagnostic System NT809BT User's Manual V1.0
Figure 4-2 Sample VCI Manager Screen
4. Check if the button at the toolbar turns to green. If yes, it means it’s
ready to start diagnosis.
Figure 4-3 Sample VCI Indicator Status Screen
NOTE
If the VCI Indicator isn’t green , it indicates that the signal strength of the
transmitter is too weak to be detected. In this case, try to get closer to the
device, or check the connection of VCI dongle, and remove all possible
objects that cause signal interference
4.2 VIN Reading
VIN button on the title bar is a shortcut for VIN reading menu, which
includes Automatic Read, Manual Entry, eliminating the need for navigating
through complicated car identification process.
To Next Page
Loading...
