Automotive Diagnostic System NT809BT User's Manual V1.0
Figure 5-29 Sample ECU Information save Screen
6 Maintenance
This section gives brief instructions of the most commonly required service
and maintenance operations. Typical service operation screens are a series
of menu driven executive commands. Follow on-screen instructions to
complete the operation.
Available service and maintenance options include:
● Oil Light Reset
●
EPB Service
●
Battery Configuration
●
DPF Regeneration
● TPS/TBA
● SAS Calibration
● CVT
●
Gear Learn
●
TPMS Relearn
●
Odometer
● Injector coding
● ABS Bleeding
● Key Programming/ Immobilizer
6.1 Oil Light Reset
Oil Light Reset menu allows you to reset the service lamps on the
instrument cluster. The Service Indicator System is designed to alert the
driver when the vehicle is due for a service.
Oil service reset methods are determined by the vehicle being tested.
Depending on the vehicle being tested, any of the following means displays:
To Next Page
Loading...
