24
HOW TO PROCEED
Check oil level in engine
Only proceed with the engine stopped and at a low temperature, so
as to avoid the risk of burning.
Take all necessary action to ensure that the machine is “level”.
Using the dipstick (1), check that the oil level is between the "Min"
and "Max" levels.
If the level is too low, top up through the inlet, after first removing
the relevant cap (2).
WARNINGS
After topping up, make sure that the oil level does not exceed the
"Max" limit marked on the dipstick.
Make sure that the dipstick is inserted properly and the filler cap
is turned in a clockwise direction until it stops turning completely.
To Next Page
Loading...
