EasyManua.ls Logo

Framery One - Fire Safety Guidelines; Lifting and Moving Safety Procedures

Framery One
51 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Framery One
Only in USA and Canada: This product is for use on a nominal 120-volt
circuit and has a grounding plug that looks like the plug illustrated in the
figure below. Make sure that the product is connected to an outlet having the
same configuration as the plug. No adapter should be used with this product.
Keep the power cord of the product away from heated surfaces.
Do not use the pod if you notice any defects or damage to the electrical
equipment.
Do not connect any extension cords to the power outlet(s) of the product.
1.7.3 Fire safety
WARNING!
To reduce the risk of burns, fire, electric shock, or injury to persons,
obey the following:
If safely possible to perform, disconnect the power cord from the power
outlet if there is a fire inside the product.
The power cord serves as a power disconnect device for pluggable
equipment. The power outlet shall be located near the equipment and shall
be easily accessible.
Fire safety end devices (alarms, sprinklers etc.) can also be installed inside the pods
(instructions available upon request). The need for end devices inside the pod is always
determined by the applicable local authorities.
1.7.4 Lifting safety
WARNING!
To reduce the risk of injury to persons and damage to property, obey
the following:
Obey all local rules and regulations regarding lifting ergonomics and lifting
safety.
Carefully plan all lifts before hand.
8
Changing the door handedness
info@frameryacoustics.com

Related product manuals