27
Installation
Important: the appliance must be installed in accordance with the applicable norms and laws in force. The
appliance should only be installed by specialised authorised staff.
A special note about the cabinet
The components of the cabinet
used to house the built-in oven
(plastic parts and veneered wood)
should be bound using heatproof
glues (max 100°C): unsuitable
materials and glues could cause
warping and ungluing. The cabinet
must allow for enough clearance
for the electrical cables to pass
freely. The cabinet used to house
the built-in oven should be sturdy
enough to bear the weight of the
appliance. The oven should be
fitted securely to the housing
foreseen. The oven can be built
into a tall cabinet or underneath
the worktop of a modular base
unit, as long as sufficient air
circulation is ensured.
560 mm
To Next Page
Loading...
Need help?
General